Hello partners
around one month ago i won one ebay bid for a chip set from MTM 3B engine to RS2 parts.
http://cgi.ebay.de/ws/eBayISAPI.dll?...=STRK:MEWNX:IT
as we can see this "gentleman" guy said just this :
-----------------------------------------------------------------------
Dear Audi 20V Turbo Tuning friends.
Offered here my tuning chips fürn Audi S2 and 200 20V 220hp engine, 3B to RS2 conversion!
The software has been programmed to approximately 365 hp and 540nm of the company MTM.
For the conversion you still need the following parts: RS2 Turbocharger / Manifold RS2 / RS2 jet fuel pressure on 4bar / 300kPa Mapsensor in the ECU,
modified or larger exhaust / cat tubes or Theorem Metallkat!
I drove with my Audi about 1.8 bar on overboost, and about 1, 4bar holding pressure.
Was going Ziehmlich violently especially the high torque acceleration my car from 3200U/min
extremely forward and turned up very quickly and ran smoothly for GPS 280Km / h and more!
Have fun with your bids!
Sale by Owner therefore without warranty and return policy!
--------------------------------------------------------------------
After all i received these chips in my home 2 weeks ago and me,very happy to test them the fast as possible
Ok, i have already installed all the parts as the ebay seller said,and what´s the sorprise??
cruising the AFR it is FINE ( between 13´5 / 14´7 )
BUT
in the first moment that the turbo it´s going to load pressure the AFR numbers are complete a S H I T ¡¡¡ 

( between 15 / 18 )


of course i´ve never continue the bost up to more than 1 bar of course testing only.
very fast open the ECU again and MTM lier chips out for install again my 2.0bAR Hamon Motors chips that them works PERFECT with a very good AFR numbers
yesterday i emailed the ebay seller asking him about wich parts i have to install for use correctly the MTM chips,and all the things he said is :
---------------------------------------------------------
Hallo, ich spreche kein Englisch ich verstehe Ihre Fragen nicht! Was es auch immer für ein Problem gibt bei mir haben die Chips tadellos funktioniert!
MfG Ronny Stephan
-----------------------------------------------------------
Google translate :
Hello, I do not speak English, I do not understand your questions! Whatever it is for me to have a problem with the chip works perfectly!
Ronny MfG Stephan
-----------------------
and then i need HELP from someone who can talk/write in German language ,because i dont trust a lot in the google trasnlater
if someone can let a a hand to me please contact with me to make me a write test for send to the ebay lier seller.
aniway he has more than 600 items sold.... and 100% positive
THANKS IN ADVANCE
-T.h.c. Thomas
- ronnysdj

around one month ago i won one ebay bid for a chip set from MTM 3B engine to RS2 parts.
http://cgi.ebay.de/ws/eBayISAPI.dll?...=STRK:MEWNX:IT
as we can see this "gentleman" guy said just this :
-----------------------------------------------------------------------
Dear Audi 20V Turbo Tuning friends.
Offered here my tuning chips fürn Audi S2 and 200 20V 220hp engine, 3B to RS2 conversion!
The software has been programmed to approximately 365 hp and 540nm of the company MTM.
For the conversion you still need the following parts: RS2 Turbocharger / Manifold RS2 / RS2 jet fuel pressure on 4bar / 300kPa Mapsensor in the ECU,
modified or larger exhaust / cat tubes or Theorem Metallkat!
I drove with my Audi about 1.8 bar on overboost, and about 1, 4bar holding pressure.
Was going Ziehmlich violently especially the high torque acceleration my car from 3200U/min
extremely forward and turned up very quickly and ran smoothly for GPS 280Km / h and more!
Have fun with your bids!
Sale by Owner therefore without warranty and return policy!
--------------------------------------------------------------------
After all i received these chips in my home 2 weeks ago and me,very happy to test them the fast as possible

Ok, i have already installed all the parts as the ebay seller said,and what´s the sorprise??
cruising the AFR it is FINE ( between 13´5 / 14´7 )
BUT
in the first moment that the turbo it´s going to load pressure the AFR numbers are complete a S H I T ¡¡¡ 

( between 15 / 18 )


of course i´ve never continue the bost up to more than 1 bar of course testing only.
very fast open the ECU again and MTM lier chips out for install again my 2.0bAR Hamon Motors chips that them works PERFECT with a very good AFR numbers
yesterday i emailed the ebay seller asking him about wich parts i have to install for use correctly the MTM chips,and all the things he said is :
---------------------------------------------------------
Hallo, ich spreche kein Englisch ich verstehe Ihre Fragen nicht! Was es auch immer für ein Problem gibt bei mir haben die Chips tadellos funktioniert!
MfG Ronny Stephan
-----------------------------------------------------------
Google translate :
Hello, I do not speak English, I do not understand your questions! Whatever it is for me to have a problem with the chip works perfectly!
Ronny MfG Stephan
-----------------------
and then i need HELP from someone who can talk/write in German language ,because i dont trust a lot in the google trasnlater
if someone can let a a hand to me please contact with me to make me a write test for send to the ebay lier seller.
aniway he has more than 600 items sold.... and 100% positive

THANKS IN ADVANCE

-T.h.c. Thomas

- ronnysdj

if not,may i will can destroy for sure my engine
Comment